Progressive stamping is a metalworking method that can encompass punching, coining, bending and several other ways of modifying metal raw material, combined with an automatic feeding system.
The feeding system pushes a strip of metal (as it unrolls from a coil) through all of the stations of a progressive stamping die. Each station performs one or more operations until a finished part is made. The final station is a cutoff operation, which separates the finished part from the carrying web. The carrying web, along with metal that is punched away in previous operations, is treated as scrap metal. Both are cut away, knocked down (or out of the dies) and then ejected from the die set, and in mass production are often transferred to scrap bins via underground scrap material conveyor belts.
The progressive stamping die is placed into a reciprocating stamping press. As the press moves up, the top die moves with it, which allows the material to feed. When the press moves down, the die closes and performs the stamping operation. With each stroke of the press, a completed part is removed from the die.
Since additional work is done in each "station" of the die, it is important that the strip be advanced very precisely so that it aligns within a few thousandths of an inch as it moves from station to station. Bullet shaped or conical "pilots" enter previously pierced round holes in the strip to assure this alignment since the feeding mechanism usually cannot provide the necessary precision in feed length.
- How To Identify The Type Of Motorcycle Lamp?
- What Is Metal Stamping Tools
- Applications Of The Progressive Stamping
- 6 Major Automotive Stamping Parts Inspection Me...
- Progressive Mode Features
- Which Material Is Used For Drawing Parts
- The Process Of Drawing Parts
- Consequences Of Improper Operation Of Metal Dra...
- What Does Automobile Bulb H1H4H7 Mean?
- H7 Lamp Base H4 Lamp Base Difference
- Progressive Die Stamping
- More About Deep Drawn Stampings