Modified lights can make the car more personal, but if it is not handled properly, it may pose a safety hazard. If you want to change the lights, the cat lights suggest that you must understand the following five points to protect your driving safety. The following industry insider gives you the opportunity to change the lights.
Professional lamp modification will greatly reduce the chance of spontaneous combustion
Tu Cat professional experience concluded that the car headlights voltage is only 12 volts, but after this modification, the newly added supercharger can make the instantaneous voltage reach 23,000 volts, and then reach 8000 volts after stabilization, running on the original car line and equipment. It will have a big impact. In other words, such private modification often leads to overheating of the vehicle's line, speeding up the aging of the line, and the probability of short circuit or even spontaneous combustion is greatly increased. Therefore, the method of remodeling the lighting device in the auto repair shop is simple and rough, and it will not be able to install and adjust the brightness, angle, distance, height, color temperature, etc. of the lamp in accordance with national technical standards, and must find a professional store.
The lights should not be too bright, otherwise the hidden dangers at night will increase.
According to the traffic police, the brightness of the lights is a national standard. High-intensity lights can easily cause “instant blindness” to the driver when driving at night, which lasts for about 3 to 5 seconds. In a matter of seconds, the driver is driving like a closed-eye, and the ability to observe the surrounding pedestrians and the vehicles coming and going is greatly reduced, resulting in traffic accidents. "There is no brightest, only brighter!" This is in the flicker you don't understand.
In the modification, the manufacturer's configuration should be used as a reference.
In recent years, when the lights are modified, there are angel eyes, devil eyes, etc., by installing lenses to achieve different visual effects, and the color matching is free to choose, so that your car can be more personalized, but in fact In the process of dismantling and reloading, the construction is improper or the craft is lacking. In the later stage, the sealing problem often occurs, causing the headlights to easily fog or flood.
The source of the modified parts must be regular
More than 50% of the spare parts of the unmodified refurbishers' modified vehicle lighting devices are recovered from the accidental vehicles, and the quality cannot be guaranteed. There is a great potential safety hazard. Tu Cat suggested that no matter which part of the vehicle is modified, it must be confirmed in advance whether the source of the modified parts is legal and legal, try to choose some big stores, do not easily believe that the business is “blowed”, if the price of the parts is much lower than the market The average level is more important.
The lamp modification should be registered in the vehicle management office.
Once the owner changes the light, he/she must apply to the vehicle management office for “application for change registration” within 10 days after the modification is completed. The inspection station will evaluate the changed lighting parameters and conform to the national standards before finally allowing the road.
Related Industry Knowledge
- Stamping Die Standard Parts Industry in China
- Main Operation Performed in a Stamping Die
- Bending Stamping Die Structure
- The selection of automotive stamping parts need...
- What is the difference between progressive die ...
- What are the advantages of metal stampings?
- Main methods of corrosion protection for metal ...
- Service life of stretch stamping parts
- Determination of drawing process
- Instructions for use of automotive bulbs