invitech

FAQS

Home / FAQS

​Matters needing attention in the processing of metal stamping and drawing parts

INVITECH Precision—For more than 30 years, we have been engaged in the custom processing of precision metal stamping and deep drawing parts, and can customize various complex precision metal stamping and deep drawing parts according to customer requirements. Through many years of customized processing experience summarizing, INVITECH Precision has discovered some things that need to be paid attention to in the process of metal stamping and drawing parts processing, and I hope it will be helpful to everyone.

deep drawing parts

1. The shape of deep drawing parts should be as simple as possible, and be formed at one time as much as possible

2. For parts that need to be stretched multiple times, under the premise of ensuring the necessary appearance quality, traces should be minimized during the stretching process

3. The distance from the edge of the hole on the top or flange of the tensile piece to the side wall should be appropriate

4. The fillet radius of the bottom and side walls, the flange, wall surface of the deep drawing part and the four corners of the rectangular part should be appropriate